Mr. Finishing Surfacer 1000 Mahogany 40ml - SF290

The product range is supplied either in a spray gun bottle or in an aerosol.

Apply in a light coat with a spray gun or spray on a dry and degreased model surface.

To seal joints and rough areas of the model, apply topically with a brush in several coats.

Do not thin.

After drying, sand with fine sandpaper under water at 800 -1000 grit. Repeat the whole process if necessary.

For fine sealing, spray with a spray gun or aerosol.

If using a spray gun, thin with Gunze Mr.COLOR THINNER thinner as required. The recommended dilution is 1.5:1 to 2.5:1 (by volume, thinner:sealer).

Do not use other thinners.

A properly sprayed surface is semi-matt, smooth, light grey.

A light coat of Mr. Surfacer will highlight imperfections, dips, scratches and surface irregularities. Sand these areas with fine sandpaper under water and re-spray. Repeat the process as necessary.

The surface treated in this way can be polished to a high gloss, which is particularly important when applying Mr.Metal Color paints.

For polishing, use fine sandpaper or 4000 grit canvas and polishing felt.

Polishing pastes can also be used.